Front crankshaft pulley, genuine toyota parts

If you’re having the typical “nasty oil leak from the front seal” issue, and you’ve replaced the front seal with a good quality one, this is probably your issue. Strangely enough the rubber front seal actually cuts a groove into the front pulley sealing surface and causes that leak (see picture). 

See the "individual gaskets and seals" page for the OE crank seal and see below for the crank pulley bolt.

NO! we do not recommend a “seal saver” for many reasons. Do it right. 

If you have power steering, you will re-use your outer pulley that bolts to the front with 4 bolts. 

fits all 22R / 22RE 1981-1995

each pulley is spun up on our balancer by Jim for quality control