Front crankshaft pulley, genuine toyota parts
**I've found a couple possible aftermarket alternates that are being checked out, once I’m happy with the quality, I’ll add them to the site.
If you’re having the typical “nasty oil leak from the front seal” issue, and you’ve replaced the front seal with a good quality one, this is probably your issue. Strangely enough the rubber front seal actually cuts a groove into the front pulley sealing surface and causes that leak (see picture).
See the "individual gaskets and seals" page for the OE crank seal and see below for the crank pulley bolt.
NO! we do not recommend a “seal saver” for many reasons. Do it right.
If you have power steering, you will re-use your outer pulley that bolts to the front with 4 bolts.
*this is a special order part and it will take a few days to get into my hands. There are only a few remaining in the country.
fits all 22R / 22RE 1981-1995
Front crankshaft pulley, genuine toyota parts
**I've found a couple possible aftermarket alternates that are being checked out, once I’m happy with the quality, I’ll add them to the site.
If you’re having the typical “nasty oil leak from the front seal” issue, and you’ve replaced the front seal with a good quality one, this is probably your issue. Strangely enough the rubber front seal actually cuts a groove into the front pulley sealing surface and causes that leak (see picture).
See the "individual gaskets and seals" page for the OE crank seal and see below for the crank pulley bolt.
NO! we do not recommend a “seal saver” for many reasons. Do it right.
If you have power steering, you will re-use your outer pulley that bolts to the front with 4 bolts.
*this is a special order part and it will take a few days to get into my hands. There are only a few remaining in the country.
fits all 22R / 22RE 1981-1995
